micare Copper Scourer XL on a light background

Burnt-on roasting tins and pans after Christmas dinner, without ammonia

After the roast, the caramelised potatoes or the last tray of gravy, a dark, burnt-on layer is often left on the roasting tin and in the pots. Many people still reach for the classic advice of brown soap and ammonia spirit in a closed bag outdoors. It is a sharp experience – both for the nose and for the kitchen afterwards. Here is a way to clean a roasting tin and burnt-on pans without ammonia.

If the extractor hood and greasy cabinet doors also need a round before the guests arrive, start with our guide to cleaning the extractor hood and greasy kitchen cabinets.

Why do fat and sugar burn on?

In a hot oven, fat and sugar melt, spread across the surface and dry onto the metal. When this happens more than once – or when the roasting tin is left with food residue until it is completely cold and hard – the deposit turns dark and sticks. That is why an ordinary wash often is not enough, and why it makes sense to distinguish between soaking and the cleaning that follows on the surface itself.

What you need

  • Dish soap – a mild and effective detergent for dishes and kitchen utensils. It can also be applied directly to soiled items; then rinse thoroughly with clean water.
  • Copper Scourer XL – for burnt-on food in pots, pans and baking trays. It is suitable for glass, porcelain, steel, enamel and ceramics. For stubborn dirt you can add a little dishwashing liquid.
  • Optionally a scouring pad – a natural sisal pad for robust surfaces. Use it with water and a suitable cleaner.
  • Hot water and a soft cloth or sponge for rinsing and drying.

Soak in hot water with dish soap

Soaking is what does most of the work – including on a coated pan, where you need to stay away from scouring products. Do it like this:

  1. Scrape off loose food residue and pour off excess fat while it is still warm enough to run.
  2. Fill the roasting tin, pot or pan with hot water and a suitable splash of Dish soap.
  3. Leave it to stand while you clear the table or put the coffee on. The longer the deposit has been sitting, the more the soak helps.
  4. Empty the water and rinse. Whatever is still stuck on steel and enamel, you take with Copper Scourer XL – or with the scouring pad on robust surfaces.

Copper Scourer XL on steel and enamel

Once the base has softened, you can work on the deposit itself. Choose the tool according to the surface – not according to how impatient you are.

Copper Scourer XL is made for burnt-on food in pots, pans and baking trays. Moisten the sponge slightly and work in gentle, circular motions. If the residue is particularly stubborn, add a little dishwashing liquid. The copper removes stubborn dirt without scratching enamel, glass, stainless steel or ceramics. Rinse the sponge thoroughly and leave it to dry.

On robust surfaces you can also use the scouring pad – a natural sisal pad. Dampen the pad and the surface, and work with light pressure in gentle circular motions together with water and a suitable cleaner.

What not to use on non-stick coating

A coated pan or pot will not tolerate the same treatment as steel and enamel. Copper Scourer XL must not be used on Teflon, non-stick coatings, lacquered or delicate surfaces.

Here, soaking and Dish soap with a soft sponge or cloth is the safe route. You can apply the soap directly to whatever is left and rinse thoroughly with clean water afterwards. Do not move on to scouring products just because the coating still looks dull – it is usually the coating that loses, not the food.

The quick clean-up on Christmas Eve

What often saves the roasting tin is what you do while the food is still warm. Fill it with hot water and a splash of dish soap before you sit down to eat, so the residue does not dry hard overnight. When the presents are opened, or the coffee is poured, empty the water and finish the job: Copper Scourer XL on steel and enamel, and only soap and a soft sponge on coated surfaces.

If you have several tins in the oven at once, take them in the order they come out – one tin soaking at a time is easier than a stack that has stood and hardened on the counter.

Frequently asked questions

Can I clean a coated pan with the copper scourer if I am careful?

No. Copper Scourer XL is not suitable for Teflon, non-stick coatings, lacquered or delicate surfaces. Use a soak, dish soap and a soft sponge.

Do I need ammonia to get the roasting tin clean?

No. Start with hot water and dish soap, then clean steel and enamel with Copper Scourer XL. You avoid both the ammonia and the sharp smell in the kitchen.

What about the extractor hood and the doors above the hob?

That is a different job with its own guide. See cleaning the extractor hood and greasy kitchen cabinets.

In short

  • Fat and sugar burn on when they melt in the oven and dry onto the metal – especially if tins and pots are left to stand.
  • Soak in hot water with Dish soap, including on coated pans.
  • On pots, pans, baking trays and enamel: Copper Scourer XL – not on non-stick or Teflon.
  • On robust surfaces you can also use the scouring pad with water and a suitable cleaner.
  • On Christmas Eve: water and soap in the tin while you eat, so you are not left with a hardened roasting tin the next morning.