Hand holding micare Balsam over a black composite sink

White spots on your black composite sink? How to make it deep black again before the holidays

When the kitchen was new, the black composite sink was the star of the show. Now it looks grey and dull, and there are white spots on the black composite sink – especially around the drain and along the edge where water sits. And right now, as the kitchen shifts from everyday meals to holiday baking, stews and festive dinners, the sink gets more use than at any other time of year. Here is a simple routine to make your sink look black again, plus a small habit that keeps it that way.

If the rest of the kitchen needs attention before the holidays too, take a look at our guide to cleaning your extractor hood and greasy kitchen cabinets.

Why does a black composite sink get white spots?

The white marks are rarely a sign that the colour has faded. More often, limescale and soap residue have built up as a thin film on the surface. When water droplets dry, the minerals are left behind, and on a dark surface you see them straight away. Washing-up liquid, food residue and grease get trapped in that film, and over time the sink looks grey and dull – even right after you have wiped it.

That also means the answer is not to scrub harder. It is about cleaning off the film and then giving the surface some care, so limescale and dirt find it harder to stick again.

What you need

  • KIT 1 | Multi Surface Renewal – brings together 250 ml Cleaning Soap, 100 ml Balsam and a total of 5 OEKO-TEX®-certified care and cleaning sponges. micare itself lists composite and granite kitchen sinks among the surfaces the kit is made for.
  • A microfibre cloth to remove soap residue with clean water.
  • A dry, lint-free cloth for buffing.

Step by step: how to get your composite sink black again

The principle is the same one micare describes for KIT 1: clean first, then care.

1. Test first and clear away the loose stuff

Always try a small, hidden spot first – for example behind the tap or under the rim. Empty the sink, lift out brushes and the strainer, and rinse away loose food residue.

2. Clean with the Cleaning Soap

Lightly dampen a sponge, work up a lather with the Cleaning Soap and clean the whole sink in circular motions. Take your time around the drain, along the waterline and where the sink meets the tap, as this is usually where the film is thickest. The Cleaning Soap is free from perfume and optical brighteners and suits many smooth surfaces.

3. Remove soap residue and let the sink dry completely

Wipe off the soap residue with a wet microfibre cloth and clean water. Then let the sink dry completely before moving on. Balsam needs a clean, dry surface – otherwise you seal in moisture and residue.

4. A thin layer of Balsam

Dip a clean sponge into the Balsam, wipe off the excess on the rim of the tub and massage a thin, even layer into the surface in circular motions. Balsam is easiest to work with at room temperature. If the surface feels greasy, you have used too much – simply wipe off the excess.

5. Buff

Buff with a dry, lint-free cloth. Balsam brings out the colour on most surfaces, so the black usually looks deeper and more even again. At the same time, it helps protect against limescale and dirt settling in.

Tip: Do the treatment in the evening, once the washing-up is done. That way the sink has time to dry before it is needed again.

Is the limescale thick around the drain?

If a limescale ring has built up over a long time, you may need a little more than soap. KIT 7 | Indoor Renewal contains the same Cleaning Soap and Balsam plus a cleansing paste for tougher dirt and limescale. Always use the paste as a foam – never rub it on directly – and test on a hidden spot first, as not every surface tolerates the same treatment. As always, finish with a thin layer of Balsam.

The everyday habit that keeps your sink black

The biggest difference comes after the washing-up: rinse the sink and wipe it dry with a well-wrung microfibre cloth. The cloth absorbs the water instead of pushing it around, so no droplets are left to dry into new marks.

For daily wiping between treatments, Multicleaner pairs well with KIT 1 – spray, wipe with a cloth, done. And remember to wash your cloths regularly; if they have started to smell sour, read how to keep tea towels and cloths fresh.

Repeat the Cleaning Soap and Balsam treatment when water no longer beads on the surface, or when you can see limescale and dirt starting to settle again.

What to avoid

  • Steel wool, coarse scouring pads and hard brushes, which can wear a matt surface.
  • Leaving pots, dishes or wet cloths in the sink for a long time – it gives the water time to dry in.
  • Applying Balsam to a wet or dirty sink.
  • Too much Balsam. A thin layer is enough.

Frequently asked questions

Can I use KIT 1 on my composite sink?

Yes. micare lists composite and granite kitchen sinks as examples of surfaces KIT 1 can be used on. Always test on a hidden spot first.

How often should I treat the sink?

When limescale and dirt start to settle again, or when water no longer beads on the surface. With a daily wipe, the result lasts longer.

Will the Balsam make the sink darker?

Balsam can make the surface slightly darker and brings out the colour on most materials. On a black sink that is exactly what most people want – but test first so you know the result.

Does the Balsam smell?

No. micare Balsam is odourless, so it fits right into a kitchen where food is being prepared.

In short

  • White spots on a black composite sink are usually limescale and soap residue – not faded colour.
  • Clean with Cleaning Soap, remove residue with water and a microfibre cloth, and let the sink dry completely.
  • Apply a thin layer of Balsam and buff – KIT 1 has everything in one set.
  • Wipe the sink dry after the washing-up, and repeat the treatment when water no longer beads.