micare Nordic Caddy with cleansing soap, balm, brushes and a cloth on a plank floor

Cleaning your extractor hood and greasy kitchen cabinets: get your kitchen ready for Christmas dinner

Your extractor hood has been through a whole autumn of cooking. With Christmas dinner on the way, you can often both see and feel it: a sticky film on the cabinet doors above the hob, a dull edge on the hood and a grease filter that has seen better days. Here is a simple plan for cleaning your extractor hood, grease filter and greasy kitchen cabinets, so your kitchen is ready before the Christmas dinner goes on the table.

The plan takes one afternoon. Afterwards, a routine of just a few minutes keeps the grease away for the rest of the winter.

Why does grease stick so stubbornly?

When you fry and boil, grease vapour rises from the pan. The hood pulls a large part of it away, but the rest settles as a thin film on the cabinet doors, the tiles and the hood itself. The film catches dust, and together they form a sticky layer that gets harder to remove the longer it stays. When the grease filter is also saturated, it catches less grease, and more of it ends up in your kitchen.

Step 1: Find out which filter you have

Before you start, check the user manual for your hood. Filters are not all the same, and manufacturers give different advice.

  • Metal mesh filter: can usually be washed in the dishwasher or soaked in hot water with washing-up liquid.
  • Polyester filter: washed by hand in hot water with washing-up liquid and replaced when it loses its shape or gets a hole.
  • Charcoal filter (recirculation): in most cases it cannot be cleaned and must be replaced. Thermex writes that you should expect to replace or wash it 2-4 times a year if the grease filter is cleaned regularly (Thermex, in Danish).

Step 2: Clean the grease filter

  1. Switch off the hood and take a photo of how the filter sits, so you can put it back correctly (Bolius, in Danish).
  2. Remove the filter. It is often held in place by a magnet or a small wire.
  3. Wash it. A metal filter can often go in the dishwasher on a normal programme. Otherwise, soak it in hot water with washing-up liquid.
  4. Brush the grease loose. Use a soft brush rather than an abrasive sponge. Our DISH BRUSH, MEDIUM SOFT in beech wood and natural horsehair is made for gentle cleaning of dishes and kitchen utensils, and it sits nicely in your hand.
  5. Rinse and dry completely. Let the filter dry before you put it back. Bolius suggests that it can be left next to a radiator.

If the filter is very greasy because it has not been cleaned for a long time, you can leave it to soak for longer and repeat the process. Some guides use ammonia spirit for very stubborn grease. That requires ventilation and gloves, so if you go that route, follow the instructions in the Bolius article.

Step 3: Wipe the hood inside and out

With the filter out, it is easy to reach. Start with the cleanest area and finish with the dirtiest. Bolius recommends using a microfibre cloth, if needed wrung out in water with washing-up liquid (Bolius). Our MICROFIBRE CLOTH 50 × 70 CM is big enough to cover large surfaces in a few strokes, and the manufacturer states that it removes dust, dirt and grease.

For stainless steel, glass and tiles you can use MULTICLEANER, which removes grease, dust and everyday dirt from smooth, water-resistant surfaces. Spray on the surface and wipe with a cloth. It is not suitable for water-based painted surfaces, so always test on a hidden spot first.

For vertical surfaces, FRESH Foam Cleaner can be handy. The foam settles precisely on the surface, so you can see where you have sprayed. Wipe with a clean, dry cloth. Remember that on wood, the product may only be used on painted or lacquered surfaces.

Step 4: Tackle the greasy kitchen cabinets

The cabinets closest to the hob get the most grease. Here is how to approach them:

  1. Work from the top down, so dirt does not drip onto what you have already cleaned.
  2. Use hot water and a little soap, and wring the cloth out well so it is damp, not wet. Too much water is not good for the doors.
  3. Let the cloth do the work. If there is a sticky film, a warm, damp cloth can rest on it for a couple of minutes before you wipe. That is better than scrubbing harder.
  4. Dry with a dry microfibre cloth, and wipe the handles as well.

If your doors are laminate, you can also use CLEANING SOAP with a slightly dampened sponge in circular movements. The cleaning soap consists of 15-30% raw soap and water and is free from perfume. Test on a hidden spot, and avoid abrasive sponges on lacquered doors.

The routine that keeps the grease away

Once the deep clean is done, it is the small habits that make the difference:

  • Switch the hood on in good time. Thermex recommends switching it on about 5 minutes before cooking and letting it run for 10-15 minutes afterwards. They also advise against opening the kitchen window meanwhile, because it disturbs the air circulation.
  • Wipe the filter after cooking. Thermex suggests a wrung-out cloth after every cooking session. That way, grease does not build up.
  • Clean the filter regularly. Both Thermex and the Danish Consumer Council Tænk, according to Bolius, recommend at least once a month.
  • Wipe the doors by the hob from time to time. A quick pass with a microfibre cloth every week takes less than a minute.
  • Wash the cloth afterwards. Microfibre cloths are washed at 60 degrees without fabric softener or tumble drying, and dried on a drying rack or a radiator. Read more in our guide to sour-smelling tea towels and cloths.

Your kitchen kit for the hood and cabinets

Frequently asked questions

How often should the grease filter be cleaned?

It varies. Bolius writes that some manufacturers recommend cleaning after 15 uses, others after 30-40 uses and others every two months. Check your user manual, and as a starting point clean it at least once a month if you cook daily.

Can the grease filter go in the dishwasher?

Many metal filters can, but not all. Some manufacturers state that porcelain and metal utensils must not be in the machine at the same time. Check the manual, or run the filter on its own.

Can I wash a charcoal filter?

Usually not. Charcoal filters need to be replaced. See your user manual for how often.

Why do the cabinet doors get sticky again so quickly?

Often because the grease filter is saturated, or because the hood is switched on too late. Clean the filter, and switch the hood on before you start frying.