micare Brusevisker

How to clean windows without streaks: clear glass in the November light

You've cleaned the windows, but as soon as the light hits the glass from the side, the streaks are there anyway. It's a classic November problem: the sun sits low, the days are grey and hazy, and the glass has collected dust and film throughout the heating season. Here is a simple routine for cleaning windows without streaks – with just a few products and without spending your whole afternoon on it.

Why do you only see the streaks now?

Streaks are rarely a sign that you did something wrong – they are just easier to see in the low November light. There are typically three reasons:

  • Low, slanting light. When the light comes from the side instead of from above, it reveals every streak and fingerprint.
  • Film on the glass. In winter we keep the windows closed and turn up the heating. Dust, cooking steam and condensation settle on the glass, which makes it slightly greasy or hazy.
  • Limescale in tap water. Ordinary tap water contains limescale. When the water dries on the glass instead of being pulled off, it leaves spots and streaks.

The good news is that all three come down to one habit: clean the glass properly, and get the water off before it has time to dry.

What you need

  • A Multicleaner for the cleaning itself. It is ready to use and cleans smooth, water-resistant surfaces quickly and streak-free – including glass and mirrors.
  • A Shower Squeegee to pull off water and soap film. According to the product page, it is also great for windows on the house and the car.
  • Microfibre cloths – ideally two: one for cleaning and one completely dry for wiping edges and corners.
  • Optionally Limescale Remover for old limescale spots on glass (see below).

Step by step: cleaning windows without streaks

1. Choose the right time

Ideally, clean when it is overcast or the window is in the shade. In direct sun the water dries so quickly that it leaves streaks before you have time to pull it off. And if it froze overnight, wait until the temperature is above freezing – otherwise the water can freeze on the glass.

2. Start with the frame and sill

Wipe the frame and sill first, so you don't get dirty water running down a pane you have just cleaned. Use a damp microfibre cloth and dry afterwards with a dry one. If it is condensation that makes the frame wet in the morning, you can read more in our guide to condensation on windows.

3. Clean the glass

Spray Multicleaner onto a clean microfibre cloth or directly onto the glass, and wash the whole pane. Use small amounts – too much product just means more to get off again. If the glass is very dirty, you can do one pass first and another before you start pulling off the water. Always read and follow the instructions on the bottle, and test on a small, discreet spot first if you are unsure about the surface.

4. Pull the water off in one continuous motion

This is where it matters most. Place the Shower Squeegee in the top corner and pull down in a steady motion. Let each stroke overlap the previous one slightly, and work quickly so the water doesn't dry along the way. Wipe the squeegee's edge with a dry cloth between strokes so it doesn't drag water back onto the glass.

5. Dry edges and corners

There is almost always a little water left in the edges and along the beading. Wipe it off with a completely dry microfibre cloth before it runs down over the glass again.

6. Check against the light

Take a step to the side and look at the glass at an angle. That way you can see any leftovers while you can still wipe them off.

Old limescale spots on glass

Do you have white, dry limescale spots that won't go away with ordinary cleaning? According to the product page, micare Limescale Remover removes stubborn limescale deposits, rust, soap residue and dirt from glass, among other surfaces. Use it as directed, rinse well afterwards, and then clean the glass as described above. If you have limescale on the glass wall of your shower, read our guide to removing limescale from the glass shower screen – and keeping it away.

How to keep your windows looking good for longer

  • Wipe off condensation so it doesn't collect dust and film on the glass.
  • Dust the windowsill and the radiator before you clean – the dust easily ends up on the glass.
  • Clean often and quickly rather than rarely and thoroughly: when there isn't much built up, it is over in no time.
  • Keep a dry microfibre cloth by the window for small spots and fingerprints.

Frequently asked questions

How often should I clean my windows?

There is no fixed rule. Do the most visible panes – for example the one by the dining table – more often, and the rest when you can see the film starting to show in the light.

Why do I get streaks even though I clean thoroughly?

Usually it is because the water has had time to dry on the glass, or because there is too much product. Work in small sections, use a little product, and pull the water off straight away.

Can I clean windows in November?

Yes, as long as it isn't freezing. Choose a dry, overcast day, and be ready to wipe the edges so the water doesn't stay put.

Can I use the Shower Squeegee on windows?

Yes. According to the product page, it is good for the shower door, mirrors, tile surfaces and windows on the house and the car.

In short

  • Streaks show up most in low light, and they come from film on the glass, limescale in the water and water that dries before you get it off.
  • Clean on an overcast day, above freezing.
  • Frame first, glass afterwards.
  • Clean with Multicleaner, pull off with the Shower Squeegee in overlapping strokes, and dry the edges with a dry microfibre cloth.
  • Look at the glass at an angle at the end.